6 Cavity 1.5L Plastic Water Bottle Making Machine 3600BPH Easy Installation

Performance and Characteristics of Plastic bottle making machine

1. The molding mechanism a servo motor adopted to it that triggers off a bottom mold linkage as well. The whole mechanism works with speed, accuracy, stablity and flexiblity. Meanwhile, it is safe to the environment and efficient in energy.

2. Oil or electricity heated, the mold can ensure bottles meet the hot filling requirement and withstand a temperature up to 92℃ without deformation. The capacity of each cavity can be up to 700~850bph.

3.The servo motor driven stepping unit and stretching mechanism have improved the speed, flexibility and accuracy of blowing.

4. The preform pitch and preform heating pitch are both 114mm, which improves the efficiency and energy saving.

5. The thermostatic heating system ensure that the heating temperature of each preform surface and internal is uniform. Hinged oven holders make it easy for the operators to change infrared tubes and do maintenance.

6.The high pressure blowing system is also equipped with the gas recycling device (air recycling rate can be up to 30%)which may reduce power consumption as much as 30kw per hour.That means you do not need the low pressure air compressor any more, which will minimize your investment as well as the space for placing the machine. In one word, it is energy-efficient and environmental safe.

7.The simple slide-in way of mold mounting makes it possible for the operators to change molds easily within 30 minutes.

8.The man-machine interface is highly automated and easy to operate. The compact machine occupies a smaller area.

9.This series is applied widely in PET hot filling bottle and the theoretical output can reach to 3600 BPH.

Technical Parameter

Note: Due to continuous technical development specification would be improved without prior notice.

Special designs correspond to customers needs.